 |
 |
| MBD-X9DRL-IF -B |
|
| |
 |
| Form Factor |
|
| Dimensions |
- 12" x 10" (30.48cm x 25.4cm)
|
| |
 |
| CPU |
- Intel® Xeon® processor E5-2600
- Dual Socket R (LGA 2011)
|
| Cache |
|
| System Bus |
|
| |
 |
| Memory Capacity |
- 8x 240-pin DDR3 DIMM sockets
- Supports up to 256 GB DDR3 ECC Registered memory (RDIMM)
- Supports up to 64 GB DDR3 ECC Un-Buffered memory (UDIMM)
|
| Memory Type |
- 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
 |
| Chipset |
|
| SATA |
- SATA 2.0 3Gbps with RAID 0, 1, 5, 10
- SATA 3.0 6Gbps with RAID 0, 1, 5, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Winbond® WPCM450 BMC
|
| Network Controllers |
- Intel® 82574L Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Video |
- G200 (Winbond® WPCM450 BMC with graphic controller)
|
| |
 |
| SATA |
- 2x SATA 3.0 ports (6Gbps)
- 8x SATA 2.0 ports (3Gbps)
|
| LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 9x USB 2.0 ports total
(4 rear + 4 via header + 1 Type A)
|
| Video |
|
| Serial Port / Header |
- 2x Fast UART 16550 port / 1 Header
|
| DOM |
- 1 DOM (Disk on Module) power connector
|
|
 |
 |
 |
| Important Chassis Notes |
- To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
|
| |
 |
| PCI-E |
- 2 PCI-E 3.0 x8
- 1 PCI-E 3.0 x8 (in x16)
- 1 PCI-E 2.0 x4 (in x8)
- 1 PCI-E 2.0 x1
- 1 PCI
|
| |
 |
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
 |
| Software |
|
| Power Configurations |
- ACPI / ACPM Power Management
- Power-on mode for AC power recovery
|
| |
 |
| CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 6+1 Phase-switching voltage regulator
|
| FAN |
- 8x 4-pin fan headers (up to 8 fans)
- 8x fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote UID
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- RoHS, Halogen Free
- Dual Cooling Zones M.Y.
|
|