Supermicro 1026T-M3 Mã sản phẩm: 1026T-M3
- Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s
- Up to 48GB DDR3 1333/1066MHz ECC Registered DIMM /24GB Unbuffered DIMM
- 1 (x8) PCI-E 2.0
- Dual Intel® 82574L Gigabit Ethernet Controller
- 8x 2.5" hot-swap SAS/SATA Drive Bays
- Integrated Matrox G200eW Graphics
- 520W High-efficiency Power Supply
|
Product SKUs |
|
|
SYS-1026T-M3 |
SuperServer 1026T-M3 (Black) |
|
Motherboard |
|
|
Processor/Cache |
|
|
CPU |
Dual 1366-pin LGA Sockets |
|
Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: |
|
|
Quad-Core Intel® Xeon®Processor 5500 sequence (Nehalem-EP processor) |
|
|
NOTE: Support processors with Max TDP < 100W |
|
|
QPI |
up to 6.4 GT/s |
|
System Memory |
|
|
Memory Capacity |
6x 240-pin DIMM sockets |
|
Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory |
|
|
Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory |
|
|
Memory Mirroring supported |
|
|
Memory Type |
1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
|
DIMM Sizes |
1GB, 2GB, 4GB |
|
Memory Voltage |
1.5 V |
|
Error Detection |
Corrects single-bit errors |
|
Detects double-bit errors (using ECC memory) |
|
|
Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
|
|
On-Board Devices |
|
|
Chipset |
Intel® 5500 (Tylersburg) chipset |
|
ICH10R + IOH-24D |
|
|
SAS |
LSI SAS1068E |
|
RAID 0, 1, 10 support |
|
|
(Optional: AOC-IButton68) RAID 5 support |
|
|
SATA |
Intel ICH10R SATA 3.0Gbps Controller |
|
RAID 0, 1, 5, 10 support |
|
|
Network Controllers |
2x Intel® 82574L Gigabit Ethernet Controllers |
|
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
|
|
Graphics |
Matrox G200eW |
|
Super I/O |
Winbond 83827HF chip |
|
Input / Output |
|
|
SAS |
8 SAS / SATA ports |
|
Serial ATA |
Six Serial ATA ports |
|
Six SATA hard drives supported |
|
|
LAN |
2x RJ45 LAN ports |
|
USB |
2x USB rear ports |
|
1x USB on-board |
|
|
2x USB internal headers |
|
|
Total 6 USB 2.0 Compliant |
|
|
VGA |
1x VGA Port |
|
Keyboard / Mouse |
PS/2 keyboard and mouse ports |
|
Serial Port / Header |
1 Fast UART 16550 serial port |
|
1 Fast UART 16550 serial header (Option) |
|
|
System BIOS |
|
|
BIOS Type |
32Mb SPI Flash EEPROM with AMI® BIOS |
|
BIOS Features |
Plug and Play (PnP) |
|
PCI 2.2 |
|
|
ACPI up to 3.0 |
|
|
USB Keyboard support |
|
|
Chassis |
|
|
Form Factor |
1U Rackmount |
|
Model |
|
|
Dimensions |
|
|
Height |
1.7" (43mm) |
|
Width |
17.2" (437mm) |
|
Depth |
20" (508mm) |
|
Gross Weight |
10 lbs (4.5kg) |
|
Available Colors |
Black |
|
Front Panel |
|
|
Buttons |
Power On/Off button |
|
System Reset button |
|
|
LEDs |
Power status LED |
|
HDD activity LED |
|
|
2x Network activity LEDs |
|
|
Expansion Slots |
|
|
PCI-Express |
1 (x8) PCI-E 2.0 slot |
|
Drive Bays |
|
|
Hot-swap |
8x 2.5" Hot-swap SAS / SATA drive bays |
|
SAS / SATA Backplane |
|
|
1x SAS / SATA Backplane |
|
|
System Cooling |
|
|
Fans |
4x 40x28mm high-efficiency fans |
|
6x fans maximum |
|
|
Power Supply |
|
|
560W AC to DC power supply w/ PFC |
|
|
AC Voltage |
100-240 V, 50-60 Hz, 6.5-2.6 Amp |
|
+5V |
15 Amp |
|
+5V standby |
2 Amp |
|
+12V |
46.5 Amp |
|
-12V |
0.5 Amp |
|
+3.3V |
15 Amp |
|
Certification |
80 PLUS Silver Certified |
|
PC Health Monitoring |
|
|
CPU |
Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages. |
|
4-Phase-switching voltage regulator |
|
|
FAN |
Total of six fan headers supporting up to 6 fans |
|
Six 4-pin fan headers |
|
|
6x fans with tachometer status monitoring |
|
|
Support 3-pin fans (w/o speed control) |
|
|
Low noise fan speed control |
|
|
Temperature |
Monitoring for CPU and chassis environment |
|
Thermal Control for 6x fan connectors |
|
|
PECI |
|
|
Other Features |
Chassis intrusion detection |
|
Chassis intrusion header |
|
